, ,

11ML PF Dropper Bottle System

11ML Dropper Bottle, PF 10 Nozzle, Sterile

Catalog #: PF-P2-1110 Quantity per Box: 50Product Features: , , ,

Preservative-free formulations can be crucial to protecting a patient’s eyes. Preservatives can cause allergic reactions, irritation and in some cases even eye damage. Often compounders will use multiple containers intended for a single use too prepare a preservative free formulation. Aside from the waste, it is hard to know if the patient is complying with their drug protocol.

With the preservative free bottle, compounders can prepare a single multi-dose bottle that eliminates waste and improves patient adherence.

Features:

  • Removes need to add preservatives to the formulation, respects the ocular surface
  • 100% controlled and safe thanks to its one-way valve and patented technology
  • User-friendly and intuitive. A multi-dose dropper that most patients are used to
  • Calibrated drops mean precise dosing for a better adherence to treatment
  • Simple two-piece system, no special equipment required for assembly

Product contains:

25 – 2 packs of size 10 nozzles (single pouched)

25 – 2 packs of 11 mL bottles, Natural color (single pouched)

50 units total per box

Final release testing includes sterility and endotoxins

More detailed product information for this item is available through our FAQ page.

What final release testing is performed for these bottle products?

Test Method Component
Sterility Direct Transfer Method Embedded Spore Strip accredited to the ISO 17025 Bottle, Tip, Cap
Endotoxin/LAL ISO 17025 – (USP), General Chapter <85>, (USP), General Chapter <161>, Medical Devices Bottle, Tip, Cap

All testing is performed by qualified third party testing labs contracted with MPS Pharma. The final measurements are all reported on our current Certificate of Analysis.


Can I see a sample Certificate of Analysis that comes with this product?

How do I select the correct nozzle size?


A quick functional check of your solution can be performed via following test.
Adding solution to bottle and closing up with cap
Turn upside down periodically and drop out solution, repeat this for a few days.
Solution should come out in nice drops
If bottle is very hard to squeeze a drop out >> Go-up a size (10 to 200)
If the solution streams,, go down a size (200 to 10)
Further testing can be performed in coordination with Nemera and their lab testing services.


I am producing autologous serum tears. What is the best nozzle selection for this?

We have found through end user trial and error, the best selection for this application is the 200 nozzle.


What sort of validation data can be supplied on this product?

There are several levels of data packets that can be shared for this product some of which will require an NDA to receive. Below is a description of the packets

Packet Level Contents
Pack 0 Product overview
Pack 1 Capping recommendations
Functioning & Composition (light)
ISO Certificates
Product Performance & Microbiological Package (light)
Pack 2 – NDA required Product Composition (detailed)
Product Functioning (detailed)
Product Performance & Microbiological Package (detailed)
Pack 3 – NDA required Raw Material Compliance
Silver Ions Evaluation


Why did the product I ordered come with two different part numbers inside the box?

This product has a special operational set-up at MPS. The purchased part is a ‘kit’ of two separate line items. The bottle is sterilized separately (ETO) from the cap (gamma). Final product is kitted and sold under one line item. Example of this:

Customer Order: PF-P2-1110

Product Shipped: Outer Box Label – PF-P2-1110, Inside Contents: 25 2-Packs PF-N2-10 & 25 2-Packs PF-B2-11.0

A final cert will be provided for item PF-P2-1110


Do these come sterilized? How?

Yes. Products sterilized and released to sterility assurance level (SAL) of 10–6. The caps come sterilized via Gamma sterilization. The bottles are sterilized via ETO.


What are the pack sizes? Can I get a special pack size?

We are currently carrying out this product in 1, 2 and 100 pack sizes. We try to provide stock sizes for small and large batch compounders. We have the capability to provide special packaging configurations for our customers. Reach out today to begin collaborating.


How long can preservative free solutions be held in the bottle?

The bottle has undergone performance tests of the closure system demonstrating that the bottle can maintain sterile contents over three months of treatment. The test conditions of the study had represented a sever misuse of the bottle over that three-month period.

It is however the responsibility of the compounder to validate that the bottle and in combination with their specific drug are able perform as reflected in the study.


If I open the pouch, will the bottle contents still be sterile?

Once the pouch has been opened, then by the definition the parts cannot be considered sterile, unless the pouch is opened in a controlled sterile environment.


What is the drop size for these bottles?

Drop size is dependent on several factors including the product being dispensed and the technique in which it is dispensed. The best advice for customers is to test the dropper tip with the compounded product to determine its suitability in its application.

 

Different nozzle sizes are available that determine the nominal drop size. MPS Pharma always carries a standard size 2.4 mm in stock. The 2.4 mm tends to cover most compounding usage cases. Other sizes are available via a special-order request.

A general water reference point can be provided to our customers as a starting guideline:

Valve Version Nominal Drop Size Status
1.6 mm 28 uL Special order
2.0 mm 33 uL Special order
2.4 mm 40 uL Standard Stock
2.7 mm 43 uL Special order
3.0 mm 46 uL Special order
3.6 mm 53 uL Special order


What are the bottles made of? Can more information be shared?

The bottle itself is composed of LDPE. The cap/nozzle portion is a multi-component system composed of HDPE and silicone rubber.

A more detailed material profile is available to share with customers who complete a non-disclosure agreement.

Below is a diagram available to share (click on image below for higher resolution):


Do you carry bottles that offer UV protection? Is there data available to share?

MPS carries a series of white bottles and nozzles that can be used to create a container closure system that protects a solution from UV light.

Specific testing standards surrounding UV protection of solutions are always performed using the container closure system itself plus the drug contents. MPS does not provide drug with the bottle, therefore no meaningful data can be provided that our end user pharmacies may leverage for their own purposes.

We can anecdotally report however that our customers do routinely use specific products of ours for light protected solutions. Those same customers do report the bottle, in combination with their drug product, pass the UV protection requirement as defined in the existing testing standards.

Please reach out to us to find out which items would work best in supporting a successful passage of these tests.


Our pharmacy follows USP <797> and it requires we use depyrogenated materials. Are your products depyrogenated? Do you have a Certificate of Analysis (C of A) stating such?

All MPS lots are tested for endotoxins (pyrogens) and will meet the materials requirements as defined in USP <797>. A detailed explanation of this can be found in this PDF link. All MPS C of As include measurements for these endotoxins.